GS1100 (About Hardware)
Advices on most commonly asked questions for GS1100. Vote for the most helpful answers.
- If GS1100 can’t read any tag (SCAN LED [1 blink] -> 3 short beeps -> B/L LED [1 blink] -> SCAN LED [2 blinks every 2 seconds] when you press and hold the SCAN button for 10 seconds)
- If GS1100 can’t read any tag (SCAN LED [1 blink] -> 3 short beeps -> B/L LED [1 blink] -> SCAN LED [3 blinks every 2 seconds] when you press and hold the SCAN button for 10 seconds)
- If GS1100 can’t read any tag (SCAN LED [1 blink] -> 3 short beeps -> B/L LED [1 blink] -> B/L LED [2 blinks every 2 seconds] when you press and hold the SCAN button for 10 seconds)
- If GS1100 can’t read any tag (SCAN LED [1 blink] -> 3 short beeps -> B/L LED [1 blink] -> B/L LED [3 blinks every 2 seconds] when you press and hold the SCAN button for 10 seconds)
- If GS1100 can’t read any tag; besides, if you press and hold the SCAN button for around 1 second, SCAN LED blinks once and then B/L LED blinks twice with two rapid beeps
- If GS1100 doesn’t behave neither a beep nor vibration after it tries to read a tag; besides, if you press and hold the SCAN button for 15 seconds, SCAN LED lights around 10 seconds and then goes off
- If SCAN LED lights for 10 seconds and then SCAN LED blinks once every 2 seconds when you press and hold the SCAN button for 20 seconds
- If SCAN LED lights for 10 seconds and then B/L LED blinks once every 2 seconds when you press and hold the SCAN button for 20 seconds
- If you want to reset GS1100