TR4050-10 (About Fingerprint Reader)
Advices on most commonly asked questions for the fingerprint reader of TR4050-10. Vote for the most helpful answers.
- What are “Finger-Only”, “Card-Only” and “Card+Fingerprint”
- Is there any difference between “User Card A” (For Finger-Only/Card-Only) and “User Card B” (For Card+Fingerprint) coming with TR4050-10
- Is TR4050-10 set to “Offline” or “Online” operating mode when it is shipped
- If you use the offline operating mode and want to access by fingerprint only, why does it still need User Card A to register the fingerprint
- If you want the fingerprint template to be stored in the card (not in TR4050-10), what kind of User Card do you need
- If “Feedback: Not Found (Open COM is false)” message instead of “Put your finger” message appears in the software SmaFinger Database when you try to register your fingerprint
- If you want to access by fingerprint only, what is the maximum number of fingerprints that can be stored in TR4050-10
- If you want to transfer the fingerprint templates from one TR4050-10 to the other TR4050-10
- Is it possible to connect one TR4050-10 to the other TR4050-10 in order to transfer the fingerprint templates directly to all TR4050-10 time recorders connected in series
- Is it possible to transfer the fingerprint templates from your computer to TR4050-10 via network (TCP/IP)
- Is it possible to copy the database built in the software SmaFinger Database from one computer to the other computer
- If you want to know how many fingerprint template(s) is stored in TR4050-10
- Why does it still show old ID-code on the display of TR4050-10 even you have updated the new “Serial Number” for the user in the software SmaFinger Database
- If you want to set the fingerprint reader of TR4050-10 to default settings
- If the right LED of TR4050-10 blinks red with three beeps instead of that the middle LED blinks green when you present Manager Enroll Card to TR4050-10
- If the middle LED of TR4050-10 blinks green when you present Manager Enroll Card to TR4050-10, but after that, the middle LED still blinks green when you present User Card A (or User Card B)
- If TR4050-10 seems to accept your card/fingerprint, but the middle LED doesn’t light green
- Is it possible to change the length of output ID-code from 10 digits to 15