TR515 and TR510 (About General)
Advices on most commonly asked questions for the general tips of TR510 and TR515. Vote for the most helpful answers.
- If the display of TR515/TR510 often shows "BUSY" and the card is not accepted when you present (swipe) the card to TR515/TR510
- If the display of TR515/TR510 shows “FULL” when you present (swipe) the card to it
- Is there a limitation of punches and what will happen when the record memory gets full
- If you want to set/change IP address for TR515/TR510
- If OUT LED of TR515/TR510 lights when you press OUT button, but IN LED doesn’t light when you press IN button; or the opposite situation
- When using “In/Out Schedule” table in the software TR515 Tool/TR510 Tool (or “Event Table” in the software Time Recorder Utility) to schedule In/Out, the designated mode is not locked (user can still select In/Out mode). Is there a way to lock IN and OUT
- What is the connector with green and orange color at the back of TR515
- If you need to set the relay mode for TR515/TR510
- Does the same relay work both for the bell and the access control
- How will it work if the relay mode is set to door lock
- If you want to reset TR515/TR510
- Will you lose anything or have to redefine anything after resetting TR515/TR510
- If TR515/TR510 cannot communicate through TCP/IP (for Ethernet interface type)
- If the data file (text format file) is filled with the weird data like “000,00000000,0,01/01/1999,00:00:00” after the data is downloaded
- If you use the barcode card that has English alphabet character, like F or H, but this card number downloaded with ( : ) character, not English alphabet character (for the barcode reader type only)
- Is it possible to download the data within a certain period time; for example, you want to download the data of 8:00 to 12:00 only