GS1000 (About Hardware)
Commonly asked questions and answers for GS1000. Vote for the most helpful answers.
- If GS1000 can’t read any tag (SCAN LED blinks twice every 2 seconds after you press the SCAN button)
- If GS1000 can’t read any tag (B/L LED lights for 2 seconds with a long beep and then SCAN LED blinks twice every 2 seconds after it tries to read a tag)
- If GS1000 can’t read any tag (“1 long beep + 2 short beeps with 2 B/L LED blinks” every 2 seconds after you press the SCAN button)
- If GS1000 can’t read any tag (“1 long beep + 3 short beeps with 3 B/L LED blinks” every 2 seconds after you press the SCAN button)
- If GS1000 can’t read any tag (B/L LED blinks once every 2 seconds after you press the SCAN button)
- If SCAN LED blinks once every 2 seconds after you press the SCAN button
- If you want to reset GS1000
- If you set the power switch of GS1000 to on, but it can’t be powered on
- If the battery is broken