If you want to set/change IP address for WEC200-01

Follow the steps as below.

  1. Connect WEC200-01 with Hub via WAS-1499 cable.
  2. Power on WEC200-01 with 12VDC.
  3. Disable the firewall and antivirus program in your computer!
  4. Open the software DS Manager (Start\Programs\Tibbo Terminal Server Toolkit\Tibbo DS Manager). Find your WEC200-01 on the “Auto-Discovery” list. (Default IP address of WEC200-01 is “”.)
  5. Click your WEC200-01 on the list and click [Change IP].wec200_01_04_01.jpg
  6. Enter an available IP address and then click [OK]. Once IP address is changed successfully, WEC200-01 will sound 3 beeps and the status icon of your WEC200-01 on DS Manager’s list will become blue.wec200_01_04_02.jpg
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk