If TR515/TR510 cannot communicate through TCP/IP (for Ethernet interface type)

Follow the steps as below to set [Transport protocol] to “TCP” for the Ethernet module of TR515/TR510.

  1. Connect TR515/TR510 with Hub via WAS-1499 cable.
  2. Power on TR515/TR510.
  3. Disable the firewall and antivirus program in your computer!
  4. Open the software DS Manager (Start\Programs\Tibbo Terminal Server Toolkit\Tibbo DS Manager). Find your TR515/TR510 on the “Auto-Discovery” list.
  5. Click your TR515/TR510 on the list and click [Settings].
  6. Under [Connection] tab, set [Transport protocol] to “TCP” and then click [OK].
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk