Follow

If you want the data in TR515/TR510 to be deleted automatically whenever it is downloaded successfully by using “Time Scheduler”

�The default setting behaves that the old data will be deleted until the records occupy up to 80% capacity of the record memory. If you want the data in TR515/TR510 to be deleted automatically whenever it is downloaded successfully. Follow the steps as below.

  1. Find the file “TR515.ini” (or “TR510.ini”) at the following path C:\Program Files\GIGA-TMS\TR515 (or C:\Program Files\GIGA-TMS\TR510).
    tr51x_04_07_01.jpg
  2. Open the file “TR515.ini” (or “TR510.ini”).
  3. Change “EraseDBWhileMemUsed=80%” to “EraseDBWhileMemUsed=0%” in the file.
    tr51x_04_07_02.jpg
  4. Click [File] and then click [Save] to save the file.
    tr51x_04_07_03.jpg
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk